CISCO-WAN-AXIPOP-MIB :: axisImaGroupTestLinkIfIndex

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBaxisImaGroupTestLinkIfIndex

axisImaGroupTestLinkIfIndex

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::axisImaGroupTestLinkIfIndex

OID (numeric): 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to designate an interface as the test link. A value of -1 specifies that the implementation may choose the test link. In this case ,the implementation may also choose the value of axisImaGroupTestPattern.

What is axisImaGroupTestLinkIfIndex?

This read-write INTEGER designates which interface is to be used as the IMA group's test link, with a value of -1 specifying that the implementation may choose the test link itself. An administrator sets this to pick a specific physical line within the group to run the IMA loopback test pattern procedure over, rather than letting the platform decide. For example, an operator suspecting one particular bonded link is faulty would set this to that link's interface index to direct the test pattern procedure specifically at it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.20
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupTestLinkIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.20.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupTestLinkIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.20.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::axisImaGroupTestLinkIfIndex OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.2atmBASIS-MIB
1.3.6.1.4.1.351.110.5.2.1ausmPortBASIS-MIB
1.3.6.1.4.1.351.110.5.2.1.1ausmPortCnfBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.2.1.1.4ausmPortCnfPortImaGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.1.1.4.1ausmPortCnfPortImaGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.1.1.4.1.1ausmPortCnfPortImaGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.20axisImaGroupTestLinkIfIndexCISCO-WAN-AXIPOP-MIB