All MIBs › CISCO-WAN-AXIPOP-MIB › axisImaGroupMinNumRxLinks
axisImaGroupMinNumRxLinks
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::axisImaGroupMinNumRxLinks
OID (numeric): 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Minimum number of receive links required to be active for the IMA group to be in the Up state.At present since only symmetric configuration is supported,this should be equal to axisImaGroupMinNumTxLinks.
What is axisImaGroupMinNumRxLinks?
This read-write INTEGER (1..8) specifies the minimum number of receive links required to be active for the IMA group to be in the Up state, and because only symmetric configuration is supported, this value should equal axisImaGroupMinNumTxLinks. An administrator sets this to define how many bonded receive lines can drop before the whole logical IMA port is declared down. For example, setting this to 6 on an 8-line group means the IMA port stays Up as long as at least 6 of the 8 receive links remain active, going down only if more than 2 fail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.14 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupMinNumRxLinks
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.14.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupMinNumRxLinks.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.14.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> axisImaGroupMinNumRxLinks.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::axisImaGroupMinNumRxLinks OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.1 | ausmPort | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1 | ausmPortCnf | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.1.1.4 | ausmPortCnfPortImaGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1 | ausmPortCnfPortImaGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1 | ausmPortCnfPortImaGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.14 | axisImaGroupMinNumRxLinks | CISCO-WAN-AXIPOP-MIB |