All MIBs › CISCO-WAN-AXIPOP-MIB › axisImaGroupFailureStatus
axisImaGroupFailureStatus
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::axisImaGroupFailureStatus
OID (numeric): 1.3.6.1.4.1.351.110.5.2.1.4.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current failure status of the IMA group(the reason why the GTSM is in the DOWN state. 1) noFailure : The group is UP. 2) startUpNe : When the NE GSM is in startUp state. 3) startUpFe : When the FE GSM is in startUp state. 4) invalidMValueNe : If FE doesn't support M value this end 5) invalidMValueFe : When the FE M value is not supported by NE. 6) failedAssymetricNe : If FE doesn't support Assymetric operation of the NE. 7) failedAssymetricFe : When the FE assymetry is not supported by the NE. 8) insufficientLinksNe: When the NE is in insufficient links state 9) insufficientLinksFe: If the FE is in insufficient links state and if that message is conveyed to this end by ICP cell. 10) blockedNe : If the GSM is in blocked state. 11) blockedFe : If the FE is in blocked state. 12) otherFailure: Start-up-ack and others.
What is axisImaGroupFailureStatus?
This read-only enumerated value pinpoints the specific reason the IMA group's overall state machine (GTSM) is down, distinguishing near-end causes (like startUpNe or invalidMValueNe) from far-end causes (like startUpFe or invalidMValueFe), and covering issues such as unsupported M-values or asymmetric-operation mismatches between the two ends. An admin relies on this as the direct root-cause field when an IMA group won't come up, since it tells them which side (local or remote) and which specific negotiation parameter is at fault. For example, a status of insufficientLinksFe tells the admin the problem is not local configuration but that the far end doesn't have enough active links to meet the group's minimum requirement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.4.1.1.14 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupFailureStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.4.1.1.14.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::axisImaGroupFailureStatus.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::axisImaGroupFailureStatus OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.1 | ausmPort | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.1.4 | ausmPortStateImaGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.4.1 | ausmPortStateImaGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.4.1.1 | ausmPortStateImaGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.4.1.1.14 | axisImaGroupFailureStatus | CISCO-WAN-AXIPOP-MIB |