CISCO-WAN-AXIPOP-MIB :: ausmStdABRRIF

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBausmStdABRRIF

ausmStdABRRIF

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::ausmStdABRRIF

OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.4.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Rate Increase Factor. This unitless value has to be inversed to arrive at the actual value. The valid values possible are are only powers of 2; i.e. 1, 2, 4, 8 ..... 32768 . The SNMP agent has to verify this compliance.

What is ausmStdABRRIF?

This read-write integer sets the Rate Increase Factor (RIF) for a standard ABR connection, the counterpart to RDF, similarly a power-of-2, unitless value that must be inverted to derive its actual effect, controlling how aggressively the source ramps its rate up in response to positive congestion feedback. Admins tune this alongside RDF to shape the overall responsiveness and stability of the ABR connection's rate adaptation. For example, a smaller ausmStdABRRIF value would let the connection's rate climb back up more quickly after congestion subsides than a larger value would.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.6
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRRIF

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.6.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRRIF.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.6.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ausmStdABRRIF OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.2atmBASIS-MIB
1.3.6.1.4.1.351.110.5.2.2ausmChanBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.2.2.1ausmChanCnfGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.2.1.4ausmStdABRCnfGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.2.1.4.1ausmStdABRCnfGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.2.1.4.1.6ausmStdABRRIFCISCO-WAN-AXIPOP-MIB