All MIBs › CISCO-WAN-AXIPOP-MIB › ausmStdABRICR
ausmStdABRICR
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::ausmStdABRICR
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.4.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Initial cell Rate. The actual value depends on the speed of the logical port (which can be a T1, E1 (normal), E1 (clear), IMA T1, IMA T1, IMA E1 (normal) or IMA E1 (clear) port. Note that the IMA port's speed is variable and depends on the number of links in the port.
What is ausmStdABRICR?
This read-write integer sets the Initial Cell Rate (ICR) for a standard ABR connection - the rate a source starts at when it begins sending or resumes after the ADTF idle-decay described above - bounded in practice by the logical port's actual speed. Admins configure this as the conservative starting point for ABR rate negotiation before the closed-loop feedback mechanism adjusts the rate up or down based on network conditions. For example, a source that has been idle long enough to trigger the ADTF decrease would resume transmission at this configured ausmStdABRICR rather than its previous higher rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.11 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRICR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.11.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRICR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.11.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ausmStdABRICR.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ausmStdABRICR OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.1 | ausmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4 | ausmStdABRCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4.1 | ausmStdABRCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4.1.11 | ausmStdABRICR | CISCO-WAN-AXIPOP-MIB |