All MIBs › CISCO-WAN-AXIPOP-MIB › ausmStdABRADTF
ausmStdABRADTF
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::ausmStdABRADTF
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.4.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: ACR Decrease Time Factor. Unit of this value is milliseconds. Granularity allowed is 10 milli seconds. The SNMP agent has to verify this compliance.
What is ausmStdABRADTF?
This read-write integer sets the ACR (Allowed Cell Rate) Decrease Time Factor (ADTF), in milliseconds with 10ms granularity, for a standard ABR connection - the time after which the source's allowed rate is automatically decreased to the initial cell rate if no cells have been sent, protecting the network from a source that resumes sending after an idle period at a rate it no longer has current congestion feedback for. Admins configure this per the TM4.0 ABR spec to control how quickly an idle ABR source's rate entitlement decays. For example, a source that goes idle for longer than its configured ausmStdABRADTF would have its allowed rate reset down to the initial cell rate before it's permitted to resume sending, rather than jumping back in at its previous higher rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.10 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRADTF
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.10.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmStdABRADTF.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.2.1.4.1.10.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ausmStdABRADTF OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.1 | ausmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4 | ausmStdABRCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4.1 | ausmStdABRCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.4.1.10 | ausmStdABRADTF | CISCO-WAN-AXIPOP-MIB |