All MIBs › CISCO-WAN-AXIPOP-MIB › ausmChanTestStateCPESide
ausmChanTestStateCPESide
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::ausmChanTestStateCPESide
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.1.1.38
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This shows the state of the test When you add a connection then the chanTestState becomes notinprogress and when you select any test, it would go to inprogress state and after it completes the test, it will go to failed or passed state. 1 = Passed 2 = Failed 3 = In Progress 4 = Not In Progress
What is ausmChanTestStateCPESide?
This read-only enumerated value reports the status of the CPE-side segment continuity test triggered by ausmChanTestTypeCPESide, following the same notinprogress-to-inprogress-to-passed/failed lifecycle as the network-side test state. Admins poll this specifically after initiating a CPE-side test to learn whether the segment toward the customer's equipment passed continuity. For example, if ausmChanTestStateCPESide reports failed while the network-side test passed, the admin can localize the fault to the customer-facing segment rather than the carrier network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.38 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmChanTestStateCPESide
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.38.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ausmChanTestStateCPESide.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ausmChanTestStateCPESide OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.1 | ausmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1 | ausmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1 | ausmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1.38 | ausmChanTestStateCPESide | CISCO-WAN-AXIPOP-MIB |