All MIBs › CISCO-WAN-AAL2-PROFILES-MIB › aal2ProfileVoicePktPeriod
aal2ProfileVoicePktPeriod
Module: CISCO-WAN-AAL2-PROFILES-MIB
OID (symbolic): CISCO-WAN-AAL2-PROFILES-MIB::aal2ProfileVoicePktPeriod
OID (numeric): 1.3.6.1.4.1.351.150.17.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the packetization period in millisecs for a given codec.
The default value of this object depends upon the profile for itu 1 = 5 (Applicable value is only 5) itu 2 = 5 (Applicable value is only 5) itu 3 = 5 (Applicable value is only 5) itu 7 = 10 (Applicable values are 5 & 10) itu 8 = 10 (Applicable values are 5 & 10) itu 12 = 30 (Applicable value is only 30) custom 100 = 10 (Applicable values are 5 & 10) custom 101 = 10 (Applicable values are 5 & 10) custom 110 = 30 (Applicable values are 5,10 & 30) custom 200 = 5 (Applicable value is only 5) custom 201 = 5 (Applicable value is only 5) custom 210 = 20 (Applicable value are only 5, 10 & 20)
What is aal2ProfileVoicePktPeriod?
This read-write value configures the packetization period, in milliseconds, used for the voice codec under this AAL2 profile, with valid values constrained by the current ITU profile in use. An admin adjusts this to trade off latency against packet overhead - shorter packetization periods reduce delay but increase the number of packets, and thus overhead, per second of voice. For example, if voice calls over a WAN link are sounding delayed, the admin might check whether this profile's packetization period is set unnecessarily high and reduce it, within what the card's ITU profile allows.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.17.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-WAN-AAL2-PROFILES-MIB::aal2ProfileVoicePktPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.17.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-WAN-AAL2-PROFILES-MIB::aal2ProfileVoicePktPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.17.1.1.1.1.5.1 i <value>
Start monitoring Cisco MGX WAN ATM switching platforms (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AAL2-PROFILES-MIB::aal2ProfileVoicePktPeriod OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN ATM switching platforms (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.17 | ciscoWanAal2ProfilesMIB | CISCO-WAN-AAL2-PROFILES-MIB |
| 1.3.6.1.4.1.351.150.17.1 | ciscoWanAal2ProfilesMIBObjects | CISCO-WAN-AAL2-PROFILES-MIB |
| 1.3.6.1.4.1.351.150.17.1.1 | aal2ProfilesGrp | CISCO-WAN-AAL2-PROFILES-MIB |
| 1.3.6.1.4.1.351.150.17.1.1.1 | aal2ProfilesGrpTable | CISCO-WAN-AAL2-PROFILES-MIB |
| 1.3.6.1.4.1.351.150.17.1.1.1.1 | aal2ProfilesGrpEntry | CISCO-WAN-AAL2-PROFILES-MIB |
| 1.3.6.1.4.1.351.150.17.1.1.1.1.5 | aal2ProfileVoicePktPeriod | CISCO-WAN-AAL2-PROFILES-MIB |