CISCO-VOICE-IF-MIB :: cvIfCfgConnectionNumber

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-VOICE-IF-MIB › cvIfCfgConnectionNumber

cvIfCfgConnectionNumber

Module: CISCO-VOICE-IF-MIB

OID (symbolic): CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber

OID (numeric): 1.3.6.1.4.1.9.9.64.1.1.1.1.9

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the cvIfCfgConnectionMode is 'normal', then this object will be a zero length string.

What is cvIfCfgConnectionNumber?

This read-write DisplayString (0-32 characters) holds the E.164 phone number used to establish a connection when the interface is in trunking or PLAR mode, and it is a zero-length string when cvIfCfgConnectionMode is normal. Administrators configure this to specify exactly which destination number a trunk or PLAR-mode interface should always dial. For example, a PLAR (private line automatic ringdown) interface configured with this number would automatically dial that destination the moment the line goes off-hook, without the caller dialing any digits.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.64.1.1.1.1.9
snmpwalk -v2c -c public <target> CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.64.1.1.1.1.9.1
snmpget -v2c -c public <target> CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.64.1.1.1.1.9.1 s <value>

Start monitoring Cisco routers/gateways (analog/ISDN voice interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber OID value, configure state conditions and alerts, and monitor any Cisco routers/gateways (analog/ISDN voice interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.64ciscoVoiceInterfaceMIBCISCO-VOICE-IF-MIB
1.3.6.1.4.1.9.9.64.1cvIfObjectsCISCO-VOICE-IF-MIB
1.3.6.1.4.1.9.9.64.1.1cvIfCfgObjectsCISCO-VOICE-IF-MIB
1.3.6.1.4.1.9.9.64.1.1.1cvIfCfgTableCISCO-VOICE-IF-MIB
1.3.6.1.4.1.9.9.64.1.1.1.1cvIfCfgEntryCISCO-VOICE-IF-MIB
1.3.6.1.4.1.9.9.64.1.1.1.1.9cvIfCfgConnectionNumberCISCO-VOICE-IF-MIB