All MIBs › CISCO-UNIFIED-COMPUTING-VNIC-MIB › cucsVnicIScsiConfigOperIpPoolNameFabricB
cucsVnicIScsiConfigOperIpPoolNameFabricB
Module: CISCO-UNIFIED-COMPUTING-VNIC-MIB
OID (symbolic): CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiConfigOperIpPoolNameFabricB
OID (numeric): 1.3.6.1.4.1.9.9.719.1.53.76.1.11
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-only
Description: Cisco UCS vnic:IScsiConfig:operIpPoolNameFabricB managed object property
What is cucsVnicIScsiConfigOperIpPoolNameFabricB?
This OID reports the name of the operationally in-use IPv4 address pool for fabric B that the iSCSI vNIC address/pool configuration object that controls where an iSCSI boot vNIC's IP and IQN addressing comes from (IScsiConfig) draws the iSCSI boot vNIC's IP address from. An admin cares because if this pool runs out of addresses or is deleted, the iSCSI vNIC it feeds will fail to obtain a valid boot IP. For example, an admin troubleshooting a blade that cannot reach its iSCSI target would check whether this ipPoolName still exists and has free addresses.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.76.1.11 snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiConfigOperIpPoolNameFabricB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.76.1.11.1 snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiConfigOperIpPoolNameFabricB.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cucsVnicIScsiConfigOperIpPoolNameFabricB.1
Start monitoring Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiConfigOperIpPoolNameFabricB OID value, configure state conditions and alerts, and monitor any Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.719 | ciscoUnifiedComputingMIB | CISCO-UNIFIED-COMPUTING-MIB |
| 1.3.6.1.4.1.9.9.719.1 | ciscoUnifiedComputingMIBObjects | CISCO-UNIFIED-COMPUTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.719.1.53 | cucsVnicObjects | CISCO-UNIFIED-COMPUTING-VNIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.53.76 | cucsVnicIScsiConfigTable | CISCO-UNIFIED-COMPUTING-VNIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.53.76.1 | cucsVnicIScsiConfigEntry | CISCO-UNIFIED-COMPUTING-VNIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.53.76.1.11 | cucsVnicIScsiConfigOperIpPoolNameFabricB | CISCO-UNIFIED-COMPUTING-VNIC-MIB |