CISCO-UNIFIED-COMPUTING-VNIC-MIB :: cucsVnicIScsiAutoTargetIfDhcpVendorId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-VNIC-MIBcucsVnicIScsiAutoTargetIfDhcpVendorId

cucsVnicIScsiAutoTargetIfDhcpVendorId

Module: CISCO-UNIFIED-COMPUTING-VNIC-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiAutoTargetIfDhcpVendorId

OID (numeric): 1.3.6.1.4.1.9.9.719.1.53.39.1.4

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-only

Description: Cisco UCS vnic:IScsiAutoTargetIf:dhcpVendorId managed object property

What is cucsVnicIScsiAutoTargetIfDhcpVendorId?

This OID reports the DHCP vendor class identifier string that an auto-discovered iSCSI target interface that an iSCSI vNIC picked up via DHCP/iSCSI-boot-firmware-table discovery rather than manual entry (IScsiAutoTargetIf) sends in its DHCP request so the DHCP server can recognize it as an iSCSI-boot client and return iSCSI boot parameters. An admin cares because if this vendor ID doesn't match what the DHCP server's iSCSI boot option scope expects, the server won't receive its target IP/IQN and iSCSI boot will fail. For example, an admin troubleshooting a blade stuck at iSCSI boot would check this dhcpVendorId against the DHCP server's configured option 60 match string to rule out a mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.39.1.4
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiAutoTargetIfDhcpVendorId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.39.1.4.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiAutoTargetIfDhcpVendorId.1

Start monitoring Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicIScsiAutoTargetIfDhcpVendorId OID value, configure state conditions and alerts, and monitor any Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.53cucsVnicObjectsCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.39cucsVnicIScsiAutoTargetIfTableCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.39.1cucsVnicIScsiAutoTargetIfEntryCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.39.1.4cucsVnicIScsiAutoTargetIfDhcpVendorIdCISCO-UNIFIED-COMPUTING-VNIC-MIB