CISCO-UNIFIED-COMPUTING-VNIC-MIB :: cucsVnicEthConfigDn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-VNIC-MIBcucsVnicEthConfigDn

cucsVnicEthConfigDn

Module: CISCO-UNIFIED-COMPUTING-VNIC-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicEthConfigDn

OID (numeric): 1.3.6.1.4.1.9.9.719.1.53.74.1.2

Node type: OBJECT-TYPE

Type: CucsManagedObjectDn

Access: read-only

Description: Cisco UCS vnic:EthConfig:dn managed object property

What is cucsVnicEthConfigDn?

This read-only CucsManagedObjectDn value is the Distinguished Name (DN) of an Ethernet vNIC Adapter Policy Configuration object — the full hierarchical path UCS Manager uses to uniquely address one specific Ethernet vNIC Adapter Policy Configuration instance in its management-information tree. Since a UCS domain can contain many Ethernet vNIC Adapter Policy Configuration instances (one row per vNIC's Ethernet adapter policy configuration), the DN is what lets monitoring tools or scripts pin an SNMP row to the exact instance it describes rather than just the object type. For example, an admin troubleshooting a vNIC's Ethernet Adapter Policy Configuration that draws MAC addresses from pool 'MAC-Pool-Fab-A' and applies network-control policy 'CDP-Enabled' would read this OID to get a DN like 'org-root/...dn', letting them jump straight to that instance in UCS Manager instead of searching through the whole tree.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.74.1.2
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicEthConfigDn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.53.74.1.2.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicEthConfigDn.1

Start monitoring Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-VNIC-MIB::cucsVnicEthConfigDn OID value, configure state conditions and alerts, and monitor any Cisco UCS blade/rack servers and fabric interconnects (vNIC/vHBA) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.53cucsVnicObjectsCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.74cucsVnicEthConfigTableCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.74.1cucsVnicEthConfigEntryCISCO-UNIFIED-COMPUTING-VNIC-MIB
1.3.6.1.4.1.9.9.719.1.53.74.1.2cucsVnicEthConfigDnCISCO-UNIFIED-COMPUTING-VNIC-MIB