CISCO-UNIFIED-COMPUTING-SOL-MIB :: cucsSolConfigPolicyLevel

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-UNIFIED-COMPUTING-SOL-MIB › cucsSolConfigPolicyLevel

cucsSolConfigPolicyLevel

Module: CISCO-UNIFIED-COMPUTING-SOL-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-SOL-MIB::cucsSolConfigPolicyLevel

OID (numeric): 1.3.6.1.4.1.9.9.719.1.43.1.1.9

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: Cisco UCS sol:Config:policyLevel managed object property

What is cucsSolConfigPolicyLevel?

This is the policyLevel property of a SOL config object, the Serial-over-LAN (SOL) configuration attached to a service profile, which lets an admin reach a blade's serial console over the network instead of a physical cable, reflecting where in the UCS org hierarchy the governing policy for this instance was resolved from. An admin troubleshooting unexpected policy behavior on a SOL config can use this value to see whether the setting in effect came from the root organization, a sub-organization, or the local object itself. For example, if a SOL config under a service profile is not behaving as its local settings suggest, checking policyLevel here can reveal that a higher-level org policy is actually the one taking precedence.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.43.1.1.9
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-SOL-MIB::cucsSolConfigPolicyLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.43.1.1.9.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-SOL-MIB::cucsSolConfigPolicyLevel.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cucsSolConfigPolicyLevel.1

Start monitoring Cisco UCS blade/rack servers (Serial over LAN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-SOL-MIB::cucsSolConfigPolicyLevel OID value, configure state conditions and alerts, and monitor any Cisco UCS blade/rack servers (Serial over LAN) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.43cucsSolObjectsCISCO-UNIFIED-COMPUTING-SOL-MIB
1.3.6.1.4.1.9.9.719.1.43.1cucsSolConfigTableCISCO-UNIFIED-COMPUTING-SOL-MIB
1.3.6.1.4.1.9.9.719.1.43.1.1cucsSolConfigEntryCISCO-UNIFIED-COMPUTING-SOL-MIB
1.3.6.1.4.1.9.9.719.1.43.1.1.9cucsSolConfigPolicyLevelCISCO-UNIFIED-COMPUTING-SOL-MIB