CISCO-UNIFIED-COMPUTING-FABRIC-MIB :: cucsFabricFcSanPcEpAdminSpeed

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-FABRIC-MIBcucsFabricFcSanPcEpAdminSpeed

cucsFabricFcSanPcEpAdminSpeed

Module: CISCO-UNIFIED-COMPUTING-FABRIC-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcEpAdminSpeed

OID (numeric): 1.3.6.1.4.1.9.9.719.1.19.38.1.22

Node type: OBJECT-TYPE

Type: CucsPortSpeed

Access: read-only

Description: Cisco UCS fabric:FcSanPcEp:adminSpeed managed object property

What is cucsFabricFcSanPcEpAdminSpeed?

The real DESCRIPTION field here is just the auto-generated stub "Cisco UCS fabric:FcSanPcEp:adminSpeed managed object property", so it carries no real prose -- but the property name and its CucsPortSpeed type tell you what it holds: It holds the speed an administrator has configured for this FC SAN port-channel member port, as opposed to what actually gets negotiated on the wire. When this is set to a fixed value rather than "auto", it forces this FC SAN port-channel member port to only link up at that exact speed, which is a common requirement on older FC switch hardware that cannot auto-negotiate reliably above a given rate. An admin might pin adminSpeed on this FC SAN port-channel member port to "4Gbps" to match an aging SAN switch that only supports that rate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.19.38.1.22
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcEpAdminSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.19.38.1.22.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcEpAdminSpeed.1

Start monitoring Cisco UCS fabric interconnects with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcEpAdminSpeed OID value, configure state conditions and alerts, and monitor any Cisco UCS fabric interconnects from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.19cucsFabricObjectsCISCO-UNIFIED-COMPUTING-FABRIC-MIB
1.3.6.1.4.1.9.9.719.1.19.38cucsFabricFcSanPcEpTableCISCO-UNIFIED-COMPUTING-FABRIC-MIB
1.3.6.1.4.1.9.9.719.1.19.38.1cucsFabricFcSanPcEpEntryCISCO-UNIFIED-COMPUTING-FABRIC-MIB
1.3.6.1.4.1.9.9.719.1.19.38.1.22cucsFabricFcSanPcEpAdminSpeedCISCO-UNIFIED-COMPUTING-FABRIC-MIB