All MIBs › CISCO-UNIFIED-COMPUTING-FABRIC-MIB › cucsFabricFcSanPcAdminSpeed
cucsFabricFcSanPcAdminSpeed
Module: CISCO-UNIFIED-COMPUTING-FABRIC-MIB
OID (symbolic): CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcAdminSpeed
OID (numeric): 1.3.6.1.4.1.9.9.719.1.19.37.1.18
Node type: OBJECT-TYPE
Type: CucsPortSpeed
Access: read-only
Description: Cisco UCS fabric:FcSanPc:adminSpeed managed object property
What is cucsFabricFcSanPcAdminSpeed?
The real DESCRIPTION field here is just the auto-generated stub "Cisco UCS fabric:FcSanPc:adminSpeed managed object property", so it carries no real prose -- but the property name and its CucsPortSpeed type tell you what it holds: It holds the speed an administrator has configured for this FC SAN port-channel, as opposed to what actually gets negotiated on the wire. When this is set to a fixed value rather than "auto", it forces this FC SAN port-channel to only link up at that exact speed, which is a common requirement on older FC switch hardware that cannot auto-negotiate reliably above a given rate. An admin might pin adminSpeed on this FC SAN port-channel to "2Gbps" to match an aging SAN switch that only supports that rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.19.37.1.18 snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcAdminSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.19.37.1.18.1 snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcAdminSpeed.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cucsFabricFcSanPcAdminSpeed.1
Start monitoring Cisco UCS fabric interconnects with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-FABRIC-MIB::cucsFabricFcSanPcAdminSpeed OID value, configure state conditions and alerts, and monitor any Cisco UCS fabric interconnects from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.719 | ciscoUnifiedComputingMIB | CISCO-UNIFIED-COMPUTING-MIB |
| 1.3.6.1.4.1.9.9.719.1 | ciscoUnifiedComputingMIBObjects | CISCO-UNIFIED-COMPUTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.719.1.19 | cucsFabricObjects | CISCO-UNIFIED-COMPUTING-FABRIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.19.37 | cucsFabricFcSanPcTable | CISCO-UNIFIED-COMPUTING-FABRIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.19.37.1 | cucsFabricFcSanPcEntry | CISCO-UNIFIED-COMPUTING-FABRIC-MIB |
| 1.3.6.1.4.1.9.9.719.1.19.37.1.18 | cucsFabricFcSanPcAdminSpeed | CISCO-UNIFIED-COMPUTING-FABRIC-MIB |