CISCO-UNIFIED-COMPUTING-ETHER-MIB :: cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-ETHER-MIBcucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin

cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin

Module: CISCO-UNIFIED-COMPUTING-ETHER-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin

OID (numeric): 1.3.6.1.4.1.9.9.719.1.16.24.1.8

Node type: OBJECT-TYPE

Type: Unsigned64

Access: read-only

Description: Cisco UCS ether:FcoeInterfaceStatsHist:bytesRxDeltaMin managed object property

What is cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin?

This field is the single lowest per-interval delta value as archived in this historical snapshot for FCoE (Fibre Channel over Ethernet) payload bytes received on this converged network adapter's Ethernet uplink — the quietest interval seen across the retained collection history. This mainly matters as a sanity baseline — a DeltaMin of zero for bytesRx on this interface just confirms there were quiet intervals with none of this condition, while a DeltaMin well above zero would mean it never stopped happening even at its calmest. For example, a min of 79 bytes would reflect the quietest interval, such as one where the host issued no SCSI I/O over this path at all.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.24.1.8
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.24.1.8.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin.1

Start monitoring Cisco UCS systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMin OID value, configure state conditions and alerts, and monitor any Cisco UCS systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.16cucsEtherObjectsCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.24cucsEtherFcoeInterfaceStatsHistTableCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.24.1cucsEtherFcoeInterfaceStatsHistEntryCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.24.1.8cucsEtherFcoeInterfaceStatsHistBytesRxDeltaMinCISCO-UNIFIED-COMPUTING-ETHER-MIB