CISCO-UNIFIED-COMPUTING-ETHER-MIB :: cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-ETHER-MIBcucsEtherFcoeInterfaceStatsBytesRxDeltaAvg

cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg

Module: CISCO-UNIFIED-COMPUTING-ETHER-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg

OID (numeric): 1.3.6.1.4.1.9.9.719.1.16.23.1.6

Node type: OBJECT-TYPE

Type: Unsigned64

Access: read-only

Description: Cisco UCS ether:FcoeInterfaceStats:bytesRxDeltaAvg managed object property

What is cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg?

This field is the average, as continuously recalculated on the live object, of the per-interval delta values for FCoE (Fibre Channel over Ethernet) payload bytes received on this converged network adapter's Ethernet uplink, taken across the retained collection history for this stats object. Admins watch this to separate a genuinely sustained problem from one noisy interval — if DeltaAvg for bytesRx on this interface is climbing, a rising rate here confirms storage traffic is actually flowing over the FCoE-encapsulated link rather than sitting idle or being routed elsewhere, rather than a one-off spike. For example, an average of 158,500 bytes per interval describes this uplink's typical steady-state FCoE throughput between polls.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.23.1.6
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.23.1.6.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg.1

Start monitoring Cisco UCS systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherFcoeInterfaceStatsBytesRxDeltaAvg OID value, configure state conditions and alerts, and monitor any Cisco UCS systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.16cucsEtherObjectsCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.23cucsEtherFcoeInterfaceStatsTableCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.23.1cucsEtherFcoeInterfaceStatsEntryCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.23.1.6cucsEtherFcoeInterfaceStatsBytesRxDeltaAvgCISCO-UNIFIED-COMPUTING-ETHER-MIB