CISCO-UNIFIED-COMPUTING-ETHER-MIB :: cucsEtherErrStatsIntMacRxDeltaMin

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-ETHER-MIBcucsEtherErrStatsIntMacRxDeltaMin

cucsEtherErrStatsIntMacRxDeltaMin

Module: CISCO-UNIFIED-COMPUTING-ETHER-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsIntMacRxDeltaMin

OID (numeric): 1.3.6.1.4.1.9.9.719.1.16.1.1.23

Node type: OBJECT-TYPE

Type: Unsigned64

Access: read-only

Description: Cisco UCS ether:ErrStats:intMacRxDeltaMin managed object property

What is cucsEtherErrStatsIntMacRxDeltaMin?

This read-only Unsigned64 records the lowest per-interval delta of internal MAC receive errors observed across all collected sampling intervals for this interface's live, currently-active error-statistics record -- effectively the quietest interval seen so far. For a healthy link this minimum should sit at zero, so admins use it as a sanity check that the interface has at least some clean intervals rather than a constant, low-level error rate, since a rising count here implicates the local silicon on this specific adapter or IOM port rather than the cable, which is exactly why UCS breaks this counter out separately from the wire-level ones. A minimum value that's stuck above zero on this port -- meaning not even one polling interval came back completely clean -- indicates a persistent, not intermittent, problem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.1.1.23
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsIntMacRxDeltaMin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.1.1.23.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsIntMacRxDeltaMin.1

Start monitoring Cisco UCS systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsIntMacRxDeltaMin OID value, configure state conditions and alerts, and monitor any Cisco UCS systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.16cucsEtherObjectsCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.1cucsEtherErrStatsTableCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.1.1cucsEtherErrStatsEntryCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.1.1.23cucsEtherErrStatsIntMacRxDeltaMinCISCO-UNIFIED-COMPUTING-ETHER-MIB