CISCO-UNIFIED-COMPUTING-ETHER-MIB :: cucsEtherErrStatsHistRcvDeltaMax

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-ETHER-MIBcucsEtherErrStatsHistRcvDeltaMax

cucsEtherErrStatsHistRcvDeltaMax

Module: CISCO-UNIFIED-COMPUTING-ETHER-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsHistRcvDeltaMax

OID (numeric): 1.3.6.1.4.1.9.9.719.1.16.2.1.39

Node type: OBJECT-TYPE

Type: Unsigned64

Access: read-only

Description: Cisco UCS ether:ErrStatsHist:rcvDeltaMax managed object property

What is cucsEtherErrStatsHistRcvDeltaMax?

This read-only Unsigned64 records the single highest per-interval delta of aggregate receive errors observed across all collected sampling intervals recorded in this one archived historical sample of an interface's error-statistics -- the worst burst seen so far. This matters operationally because an average can look fine while a brief severe burst gets hidden in it, so admins check this peak value specifically to catch transient events, since admins watching this specific interface use it as the first-pass health check on its receive side before drilling into the more granular align/FCS/undersize counters for the same port. A max value that's dramatically higher than the average -- for instance ten times higher -- points to a single sharp event, such as a brief cable disturbance, rather than steady degradation on this link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.2.1.39
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsHistRcvDeltaMax

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.16.2.1.39.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsHistRcvDeltaMax.1

Start monitoring Cisco UCS systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-ETHER-MIB::cucsEtherErrStatsHistRcvDeltaMax OID value, configure state conditions and alerts, and monitor any Cisco UCS systems from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.16cucsEtherObjectsCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.2cucsEtherErrStatsHistTableCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.2.1cucsEtherErrStatsHistEntryCISCO-UNIFIED-COMPUTING-ETHER-MIB
1.3.6.1.4.1.9.9.719.1.16.2.1.39cucsEtherErrStatsHistRcvDeltaMaxCISCO-UNIFIED-COMPUTING-ETHER-MIB