CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB :: cucsEquipmentSiocTempStatsHistCmcTempAvg

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-UNIFIED-COMPUTING-EQUIPMENT-MIBcucsEquipmentSiocTempStatsHistCmcTempAvg

cucsEquipmentSiocTempStatsHistCmcTempAvg

Module: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

OID (symbolic): CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB::cucsEquipmentSiocTempStatsHistCmcTempAvg

OID (numeric): 1.3.6.1.4.1.9.9.719.1.15.198.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Cisco UCS equipment:SiocTempStatsHist:cmcTempAvg managed object property

What is cucsEquipmentSiocTempStatsHistCmcTempAvg?

This INTEGER is the average temperature, in degrees Celsius, that the Chassis Management Controller (CMC) sensor recorded over the statistics-collection interval represented by this archived sample. Because the CMC chip's own firmware can throttle or reset itself if it overheats, which would take chassis management connectivity down even while the SIOC's actual data path keeps running fine, an admin diagnosing a SIOC cooling problem checks this specific zone rather than relying only on the SIOC's single roll-up thermal status flag. An average holding near 42 across the interval is normal for this zone; a rising average even while individual max readings stay in range would flag a slow thermal drift worth watching.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.15.198.1.5
snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB::cucsEquipmentSiocTempStatsHistCmcTempAvg

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.15.198.1.5.1
snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB::cucsEquipmentSiocTempStatsHistCmcTempAvg.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cucsEquipmentSiocTempStatsHistCmcTempAvg.1

Start monitoring Cisco UCS chassis, blade/rack servers, fabric interconnects with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB::cucsEquipmentSiocTempStatsHistCmcTempAvg OID value, configure state conditions and alerts, and monitor any Cisco UCS chassis, blade/rack servers, fabric interconnects from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.719ciscoUnifiedComputingMIBCISCO-UNIFIED-COMPUTING-MIB
1.3.6.1.4.1.9.9.719.1ciscoUnifiedComputingMIBObjectsCISCO-UNIFIED-COMPUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.719.1.15cucsEquipmentObjectsCISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
1.3.6.1.4.1.9.9.719.1.15.198cucsEquipmentSiocTempStatsHistTableCISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
1.3.6.1.4.1.9.9.719.1.15.198.1cucsEquipmentSiocTempStatsHistEntryCISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
1.3.6.1.4.1.9.9.719.1.15.198.1.5cucsEquipmentSiocTempStatsHistCmcTempAvgCISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB