All MIBs › CISCO-UNIFIED-COMPUTING-COMPUTE-MIB › cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH
cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH
Module: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB
OID (symbolic): CISCO-UNIFIED-COMPUTING-COMPUTE-MIB::cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH
OID (numeric): 1.3.6.1.4.1.9.9.719.1.9.20.1.12
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: Cisco UCS compute:PCIeFatalProtocolStats:dllpErrors1WeekH managed object property
What is cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH?
This Gauge32 holds the highest single-sample count of PCIe Data Link Layer Packet (DLLP) errors that UCS Manager observed during any one collection interval within the last 7 days, i.e. a DLLP used for link-level flow control or acknowledgement was malformed or failed a CRC check on the link, captured at its worst moment. Unlike the plain (non-H) gauge for this window, this high-water value stays latched at the worst reading for the rest of the window even if the fault stops recurring, which is what lets an admin catch a brief PCIe error burst that a simple end-of-window snapshot would have missed. For example, if a marginal riser produced a spike of 19 PCIe Data Link Layer Packet (DLLP) errors in one polling cycle and then went quiet, this field would hold 19 until the last 7 days window rolls forward, even though the plain gauge has since dropped to 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.9.20.1.12 snmpwalk -v2c -c public <target> CISCO-UNIFIED-COMPUTING-COMPUTE-MIB::cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.719.1.9.20.1.12.1 snmpget -v2c -c public <target> CISCO-UNIFIED-COMPUTING-COMPUTE-MIB::cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH.1
Start monitoring Cisco UCS blade servers and chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-UNIFIED-COMPUTING-COMPUTE-MIB::cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH OID value, configure state conditions and alerts, and monitor any Cisco UCS blade servers and chassis from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.719 | ciscoUnifiedComputingMIB | CISCO-UNIFIED-COMPUTING-MIB |
| 1.3.6.1.4.1.9.9.719.1 | ciscoUnifiedComputingMIBObjects | CISCO-UNIFIED-COMPUTING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.719.1.9 | cucsComputeObjects | CISCO-UNIFIED-COMPUTING-COMPUTE-MIB |
| 1.3.6.1.4.1.9.9.719.1.9.20 | cucsComputePCIeFatalProtocolStatsTable | CISCO-UNIFIED-COMPUTING-COMPUTE-MIB |
| 1.3.6.1.4.1.9.9.719.1.9.20.1 | cucsComputePCIeFatalProtocolStatsEntry | CISCO-UNIFIED-COMPUTING-COMPUTE-MIB |
| 1.3.6.1.4.1.9.9.719.1.9.20.1.12 | cucsComputePCIeFatalProtocolStatsDllpErrors1WeekH | CISCO-UNIFIED-COMPUTING-COMPUTE-MIB |