CISCO-THREAT-MITIGATION-SERVICE-MIB :: ciTmsThreatActionParamValue

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-THREAT-MITIGATION-SERVICE-MIB › ciTmsThreatActionParamValue

ciTmsThreatActionParamValue

Module: CISCO-THREAT-MITIGATION-SERVICE-MIB

OID (symbolic): CISCO-THREAT-MITIGATION-SERVICE-MIB::ciTmsThreatActionParamValue

OID (numeric): 1.3.6.1.4.1.9.9.603.1.3.2.1.5

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-only

Description: This object represents the value of the parameter identified by ciTmsThreatActionParamId. This value should be interpreted using type and length of the parameter value represented by ciTmsThreatActionParamType and ciTmsThreatActionParamLength respectively. In case of ciTmsThreatActionParamType being 'networkAddress', the first octet of this object will indicate the type of network address, i.e. it will be set to one of InetAddressType values as appropriate. The subsequent octets will carry the network address. For example, the first octet of ciTmsThreatActionParamValue will carry the value ipv4(1) and the next four octets will carry the respective octets of the IP address.

What is ciTmsThreatActionParamValue?

Holds the actual value of a threat mitigation action parameter; the value must be decoded using the associated type and length objects for that parameter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.603.1.3.2.1.5
snmpwalk -v2c -c public <target> CISCO-THREAT-MITIGATION-SERVICE-MIB::ciTmsThreatActionParamValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.603.1.3.2.1.5.1
snmpget -v2c -c public <target> CISCO-THREAT-MITIGATION-SERVICE-MIB::ciTmsThreatActionParamValue.1

Start monitoring Cisco network devices (Threat Mitigation Service / NIC) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-THREAT-MITIGATION-SERVICE-MIB::ciTmsThreatActionParamValue OID value, configure state conditions and alerts, and monitor any Cisco network devices (Threat Mitigation Service / NIC) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.603ciscoThreatMitigationServiceMIBCISCO-THREAT-MITIGATION-SERVICE-MIB
1.3.6.1.4.1.9.9.603.1ciscoTmsMIBObjectsCISCO-THREAT-MITIGATION-SERVICE-MIB
1.3.6.1.4.1.9.9.603.1.3ciTmsConsumerThreatCISCO-THREAT-MITIGATION-SERVICE-MIB
1.3.6.1.4.1.9.9.603.1.3.2ciTmsThreatActionTableCISCO-THREAT-MITIGATION-SERVICE-MIB
1.3.6.1.4.1.9.9.603.1.3.2.1ciTmsThreatActionEntryCISCO-THREAT-MITIGATION-SERVICE-MIB
1.3.6.1.4.1.9.9.603.1.3.2.1.5ciTmsThreatActionParamValueCISCO-THREAT-MITIGATION-SERVICE-MIB