CISCO-SYSTEM-EXT-MIB :: cseSysFIPSModeActivation

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SYSTEM-EXT-MIB › cseSysFIPSModeActivation

cseSysFIPSModeActivation

Module: CISCO-SYSTEM-EXT-MIB

OID (symbolic): CISCO-SYSTEM-EXT-MIB::cseSysFIPSModeActivation

OID (numeric): 1.3.6.1.4.1.9.9.305.1.1.9

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The object to enable/disable FIPS mode on the device. FIPS 140-2 is a set of security requirements for cryptographic modules and it details the U.S. Government requirements for cryptographic modules. A module will comprise both hardware and software, eg a datacenter switching or routing module. The module is said to be in FIPS enabled mode when a request is recieved to enable the FIPS mode and a set of self-tests are successfully run in response to the request. If the self-tests fail, then an appropriate error is returned.

What is cseSysFIPSModeActivation?

A read-write control that enables or disables FIPS 140-2 mode on the device, activating U.S. government-mandated cryptographic module security requirements.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.305.1.1.9
snmpwalk -v2c -c public <target> CISCO-SYSTEM-EXT-MIB::cseSysFIPSModeActivation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.305.1.1.9.1
snmpget -v2c -c public <target> CISCO-SYSTEM-EXT-MIB::cseSysFIPSModeActivation.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.305.1.1.9.1 s <value>

Start monitoring Cisco switches/routers with supervisor redundancy (Nexus/Catalyst) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SYSTEM-EXT-MIB::cseSysFIPSModeActivation OID value, configure state conditions and alerts, and monitor any Cisco switches/routers with supervisor redundancy (Nexus/Catalyst) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.305ciscoSystemExtMIBCISCO-SYSTEM-EXT-MIB
1.3.6.1.4.1.9.9.305.1ciscoSystemExtMIBObjectsCISCO-SYSTEM-EXT-MIB
1.3.6.1.4.1.9.9.305.1.1ciscoSysInfoGroupCISCO-SYSTEM-EXT-MIB
1.3.6.1.4.1.9.9.305.1.1.9cseSysFIPSModeActivationCISCO-SYSTEM-EXT-MIB