CISCO-SWITCH-MULTICAST-MIB :: cswmMRouteConsistCheck

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-MULTICAST-MIBcswmMRouteConsistCheck

cswmMRouteConsistCheck

Module: CISCO-SWITCH-MULTICAST-MIB

OID (symbolic): CISCO-SWITCH-MULTICAST-MIB::cswmMRouteConsistCheck

OID (numeric): 1.3.6.1.4.1.9.9.504.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the Multicast Routing(mroute) Table consistency checker support mode. The consistency checker scans the mroute table and assures that multicast-hardware entries are consistent with mroute table.

'notCapable' - This device is not capable of mroute consistency checker

'enable' - mroute consistency checker is enabled.

'disable' - mroute consistency checker is disabled.

When the value of this object is 'notCapable' the object value is not writable. The value 'notCapable' can not be set.

What is cswmMRouteConsistCheck?

A read-write setting that specifies whether the multicast route (mroute) table consistency checker is enabled, controlling whether the device scans the mroute table to verify multicast hardware entries stay consistent with it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.504.1.1.3
snmpwalk -v2c -c public <target> CISCO-SWITCH-MULTICAST-MIB::cswmMRouteConsistCheck

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.504.1.1.3.1
snmpget -v2c -c public <target> CISCO-SWITCH-MULTICAST-MIB::cswmMRouteConsistCheck.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.504.1.1.3.1 i <value>

Start monitoring Cisco Catalyst switches (Layer 2/3 switching platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-MULTICAST-MIB::cswmMRouteConsistCheck OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches (Layer 2/3 switching platforms) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.504ciscoSwitchMulticastMIBCISCO-SWITCH-MULTICAST-MIB
1.3.6.1.4.1.9.9.504.1cswmMIBObjectsCISCO-SWITCH-MULTICAST-MIB
1.3.6.1.4.1.9.9.504.1.1cswmGlobalCISCO-SWITCH-MULTICAST-MIB
1.3.6.1.4.1.9.9.504.1.1.3cswmMRouteConsistCheckCISCO-SWITCH-MULTICAST-MIB