CISCO-SWITCH-ENGINE-MIB :: cseNetflowPerVlanIfGlobalEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-ENGINE-MIBcseNetflowPerVlanIfGlobalEnable

cseNetflowPerVlanIfGlobalEnable

Module: CISCO-SWITCH-ENGINE-MIB

OID (symbolic): CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfGlobalEnable

OID (numeric): 1.3.6.1.4.1.9.9.97.1.3.15

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Indicates whether 'creation of Netflow entries per VLAN interface' feature is enabled at the device level.

If this object is set to 'false', netflow entries will be created for all VLANs.

If this object is set to 'true', creation of netflow entries can be controlled by cseNetflowPerVlanIfCtrlTable.

What is cseNetflowPerVlanIfGlobalEnable?

Globally enables or disables the device-wide feature that allows NetFlow entries to be created on a per-VLAN-interface basis; when disabled, NetFlow entries are created for all VLANs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.3.15
snmpwalk -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfGlobalEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.3.15.1
snmpget -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfGlobalEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.97.1.3.15.1 s <value>

Start monitoring Cisco Catalyst switches (Layer 2/3 switching platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfGlobalEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches (Layer 2/3 switching platforms) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.97ciscoSwitchEngineMIBCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1cseMIBObjectsCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3cseNetflowLSCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3.15cseNetflowPerVlanIfGlobalEnableCISCO-SWITCH-ENGINE-MIB