CISCO-SWITCH-ENGINE-MIB :: cseNetflowPerVlanIfEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-ENGINE-MIBcseNetflowPerVlanIfEnable

cseNetflowPerVlanIfEnable

Module: CISCO-SWITCH-ENGINE-MIB

OID (symbolic): CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfEnable

OID (numeric): 1.3.6.1.4.1.9.9.97.1.3.16.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Specifies whether creation of netflow entries is enabled on this VLAN.

If this object is set to 'true', the system will create netflow entries for this VLAN.

If this object is set to 'false', the system will not create any netflow entries for this VLAN.

When the value of cseNetflowPerVlanIfGlobalEnable is 'false', this object will not take effect.

What is cseNetflowPerVlanIfEnable?

Enables or disables creation of NetFlow entries for a specific VLAN interface, allowing per-VLAN control over which VLANs generate NetFlow flow records.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.3.16.1.2
snmpwalk -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.3.16.1.2.1
snmpget -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.97.1.3.16.1.2.1 s <value>

Start monitoring Cisco Catalyst switches (Layer 2/3 switching platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-ENGINE-MIB::cseNetflowPerVlanIfEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches (Layer 2/3 switching platforms) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.97ciscoSwitchEngineMIBCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1cseMIBObjectsCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3cseNetflowLSCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3.16cseNetflowPerVlanIfCtrlTableCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3.16.1cseNetflowPerVlanIfCtrlEntryCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.3.16.1.2cseNetflowPerVlanIfEnableCISCO-SWITCH-ENGINE-MIB