CISCO-SWITCH-ENGINE-MIB :: cseFlowMcastResultHFlag1k2k

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-ENGINE-MIBcseFlowMcastResultHFlag1k2k

cseFlowMcastResultHFlag1k2k

Module: CISCO-SWITCH-ENGINE-MIB

OID (symbolic): CISCO-SWITCH-ENGINE-MIB::cseFlowMcastResultHFlag1k2k

OID (numeric): 1.3.6.1.4.1.9.9.97.1.2.13.1.20

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: A string of octets containing one bit per out-going interface (VLAN) with VlanIndex values of 0 through 2047. Each octet within the value of this object specifies a set of eight VLANs, e.g. the first octet corresponding to VLANs with VlanIndex values of 0 through 7, the second octet to VLANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN, thus each vlan is represented by a single bit within the octet.

The bits in this object will be set to '1' if the multicast layer 3 flow described by this row instance is hardware switched on the corresponding VLAN. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.

What is cseFlowMcastResultHFlag1k2k?

A bitmap string of hardware flags per outgoing VLAN interface (index range 0-2047) for this multicast flow, with each octet covering eight VLANs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.2.13.1.20
snmpwalk -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseFlowMcastResultHFlag1k2k

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.2.13.1.20.1
snmpget -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseFlowMcastResultHFlag1k2k.1

Start monitoring Cisco Catalyst switches (Layer 2/3 switching platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-ENGINE-MIB::cseFlowMcastResultHFlag1k2k OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches (Layer 2/3 switching platforms) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.97ciscoSwitchEngineMIBCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1cseMIBObjectsCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2cseFlowCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2.13cseFlowMcastResultTableCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2.13.1cseFlowMcastResultEntryCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2.13.1.20cseFlowMcastResultHFlag1k2kCISCO-SWITCH-ENGINE-MIB