CISCO-SWITCH-ENGINE-MIB :: cseFlowFastAgePktThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-ENGINE-MIBcseFlowFastAgePktThreshold

cseFlowFastAgePktThreshold

Module: CISCO-SWITCH-ENGINE-MIB

OID (symbolic): CISCO-SWITCH-ENGINE-MIB::cseFlowFastAgePktThreshold

OID (numeric): 1.3.6.1.4.1.9.9.97.1.2.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The administrative packet threshold setting for the cseFlowFastAgingTime. The default for Fast Aging Packet Threshold is 0, i.e. no packets switched within the time set in cseFlowFastAgingTime, after an L3 flow was established. If the cseFlowFastAgingTime is not configured to the appropriate value, it will be adjusted to the closest value. The corresponding operational object, taken effect on the device, is cseFlowOperFastAgePktThreshold.

What is cseFlowFastAgePktThreshold?

This read-write setting defines the packet-count threshold used with fast aging: flows switching fewer packets than this threshold within the fast aging time are considered idle and eligible for quick removal.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.2.3
snmpwalk -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseFlowFastAgePktThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.97.1.2.3.1
snmpget -v2c -c public <target> CISCO-SWITCH-ENGINE-MIB::cseFlowFastAgePktThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.97.1.2.3.1 i <value>

Start monitoring Cisco Catalyst switches (Layer 2/3 switching platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-ENGINE-MIB::cseFlowFastAgePktThreshold OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches (Layer 2/3 switching platforms) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.97ciscoSwitchEngineMIBCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1cseMIBObjectsCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2cseFlowCISCO-SWITCH-ENGINE-MIB
1.3.6.1.4.1.9.9.97.1.2.3cseFlowFastAgePktThresholdCISCO-SWITCH-ENGINE-MIB