CISCO-SNMP-TARGET-EXT-MIB :: cExtSnmpNotifGblInformSrcIfIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SNMP-TARGET-EXT-MIB › cExtSnmpNotifGblInformSrcIfIndex

cExtSnmpNotifGblInformSrcIfIndex

Module: CISCO-SNMP-TARGET-EXT-MIB

OID (symbolic): CISCO-SNMP-TARGET-EXT-MIB::cExtSnmpNotifGblInformSrcIfIndex

OID (numeric): 1.3.6.1.4.1.9.9.412.1.5

Node type: OBJECT-TYPE

Type: InterfaceIndexOrZero

Access: read-write

Description: This object specifies the ifIdex value of the source interface to be used for sending INFORM notifications.

The value of this object should be a valid 'ifIndex' value.

This is a global configuration applied for all INFORM notifications sent by this agent to all the targets. If the source interface is configured for a specific target using the value of corresponding instance of 'cExtSnmpTargetAddrIntIfIndex', then that value takes precedence and will be used for sending the notification.

The value of this object being 'zero' implies that there is no source interface configuration for the INFORM notifications at a global level.

What is cExtSnmpNotifGblInformSrcIfIndex?

Configures the ifIndex of the interface whose address is used as the source for all outgoing SNMP INFORM notifications sent by this agent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.412.1.5
snmpwalk -v2c -c public <target> CISCO-SNMP-TARGET-EXT-MIB::cExtSnmpNotifGblInformSrcIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.412.1.5.1
snmpget -v2c -c public <target> CISCO-SNMP-TARGET-EXT-MIB::cExtSnmpNotifGblInformSrcIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.412.1.5.1 s <value>

Start monitoring Cisco routers and switches (VRF-aware SNMP management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNMP-TARGET-EXT-MIB::cExtSnmpNotifGblInformSrcIfIndex OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (VRF-aware SNMP management) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.412ciscoSnmpTargetExtMIBCISCO-SNMP-TARGET-EXT-MIB
1.3.6.1.4.1.9.9.412.1ciscoSnmpTargetExtMIBObjectsCISCO-SNMP-TARGET-EXT-MIB
1.3.6.1.4.1.9.9.412.1.5cExtSnmpNotifGblInformSrcIfIndexCISCO-SNMP-TARGET-EXT-MIB