All MIBs › CISCO-SMART-INSTALL-MIB › csiJoinWindowPeriodNextFreeIndex
csiJoinWindowPeriodNextFreeIndex
Module: CISCO-SMART-INSTALL-MIB
OID (symbolic): CISCO-SMART-INSTALL-MIB::csiJoinWindowPeriodNextFreeIndex
OID (numeric): 1.3.6.1.4.1.9.9.725.1.1.8.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: An integer which may be used as a new index in csiJoinWindowPeriodTable. The special value of 0 indicates that no more new entries can be created in csiJoinWindowPeriodTable.
This object is a legal value (if non-zero) for an index that is not currently used in the relevant table. The Network Management Application reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET.
When the SET is performed, the agent must determine whether the value is indeed still unused; two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the agent monotonically increases the value of this object.
However if the value is in use, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value.
What is csiJoinWindowPeriodNextFreeIndex?
Reports the next available index for creating a new row in the join window period table, with a value of 0 meaning the table has no room for additional entries.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.725.1.1.8.2 snmpwalk -v2c -c public <target> CISCO-SMART-INSTALL-MIB::csiJoinWindowPeriodNextFreeIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.725.1.1.8.2.1 snmpget -v2c -c public <target> CISCO-SMART-INSTALL-MIB::csiJoinWindowPeriodNextFreeIndex.1
Start monitoring Cisco Smart Install Director switch/router / branch client switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SMART-INSTALL-MIB::csiJoinWindowPeriodNextFreeIndex OID value, configure state conditions and alerts, and monitor any Cisco Smart Install Director switch/router / branch client switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.725 | ciscoSmartInstallMIB | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1 | ciscoSmartInstallMIBObjects | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1 | csiGlobalConfig | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1.8 | csiJoinWindow | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1.8.2 | csiJoinWindowPeriodNextFreeIndex | CISCO-SMART-INSTALL-MIB |