All MIBs › CISCO-SMART-INSTALL-MIB › csiJoinWindowConfigOperationMode
csiJoinWindowConfigOperationMode
Module: CISCO-SMART-INSTALL-MIB
OID (symbolic): CISCO-SMART-INSTALL-MIB::csiJoinWindowConfigOperationMode
OID (numeric): 1.3.6.1.4.1.9.9.725.1.1.8.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A join window is a time window during which a network device is allowed to upgrade image or configuration files. Only during this window can the director provide information about the image and configuration to the device. A device attempting to join the network outside of the join window will not be allowed to do so, and cannot upgrade their image and configuration files.
This object specifies the configuration of the Join Window operation mode.
closed - All devices attempting to join are denied to upgrade as indicated in the csiDeviceStatus object. Director does not provide information about the image and configuration to the device. auto - Director provides image and configuration information to devices joining during 'Join Window' period. manual - Devices attempting to join during Join Window are put on hold as indicated in the csiDeviceStatus object. Director does not give image and configuration information to these on hold devices unless the operator manually instructs the director to upgrade them.
What is csiJoinWindowConfigOperationMode?
Controls the operating mode of the join window feature, the time period during which a new network device is permitted to receive image and configuration upgrades from the director.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.725.1.1.8.1 snmpwalk -v2c -c public <target> CISCO-SMART-INSTALL-MIB::csiJoinWindowConfigOperationMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.725.1.1.8.1.1 snmpget -v2c -c public <target> CISCO-SMART-INSTALL-MIB::csiJoinWindowConfigOperationMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.725.1.1.8.1.1 i <value>
Start monitoring Cisco Smart Install Director switch/router / branch client switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SMART-INSTALL-MIB::csiJoinWindowConfigOperationMode OID value, configure state conditions and alerts, and monitor any Cisco Smart Install Director switch/router / branch client switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.725 | ciscoSmartInstallMIB | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1 | ciscoSmartInstallMIBObjects | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1 | csiGlobalConfig | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1.8 | csiJoinWindow | CISCO-SMART-INSTALL-MIB |
| 1.3.6.1.4.1.9.9.725.1.1.8.1 | csiJoinWindowConfigOperationMode | CISCO-SMART-INSTALL-MIB |