All MIBs › CISCO-SDSL-LINE-MIB › cSdslSturPerfLOSQs
cSdslSturPerfLOSQs
Module: CISCO-SDSL-LINE-MIB
OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslSturPerfLOSQs
OID (numeric): 1.3.6.1.4.1.9.9.155.1.7.1.2
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: This object specifies the number of LOSQ failures experienced by the STU-R since agent reset.
What is cSdslSturPerfLOSQs?
Counts the total number of Loss of Signal Quality (LOSQ) failures experienced by the STU-R since the agent last reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.7.1.2 snmpwalk -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturPerfLOSQs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.7.1.2.1 snmpget -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturPerfLOSQs.1
Start monitoring Cisco SDSL DSLAMs and routers with SDSL line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SDSL-LINE-MIB::cSdslSturPerfLOSQs OID value, configure state conditions and alerts, and monitor any Cisco SDSL DSLAMs and routers with SDSL line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1 | ciscoSdslLineMIBObjects | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.7 | cSdslSturPerfDataTable | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.7.1 | cSdslSturPerfDataEntry | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.7.1.2 | cSdslSturPerfLOSQs | CISCO-SDSL-LINE-MIB |