CISCO-SDSL-LINE-MIB :: cSdslSturIntervalCVs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SDSL-LINE-MIBcSdslSturIntervalCVs

cSdslSturIntervalCVs

Module: CISCO-SDSL-LINE-MIB

OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslSturIntervalCVs

OID (numeric): 1.3.6.1.4.1.9.9.155.1.9.1.5

Node type: OBJECT-TYPE

Type: PerfIntervalCount

Access: read-only

Description: This object specifies the number of coding violations experienced by the STU-R in the interval.

What is cSdslSturIntervalCVs?

Reports the count of coding violations (CRC errors) detected by the remote SDSL modem (STU-R) during the current interval, indicating line signal quality.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.9.1.5
snmpwalk -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturIntervalCVs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.9.1.5.1
snmpget -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturIntervalCVs.1

Start monitoring Cisco SDSL DSLAMs and routers with SDSL line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SDSL-LINE-MIB::cSdslSturIntervalCVs OID value, configure state conditions and alerts, and monitor any Cisco SDSL DSLAMs and routers with SDSL line cards from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.155ciscoSdslLineMIBCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1ciscoSdslLineMIBObjectsCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.9cSdslSturIntervalTableCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.9.1cSdslSturIntervalEntryCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.9.1.5cSdslSturIntervalCVsCISCO-SDSL-LINE-MIB