CISCO-SDSL-LINE-MIB :: cSdslSturDefect

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SDSL-LINE-MIBcSdslSturDefect

cSdslSturDefect

Module: CISCO-SDSL-LINE-MIB

OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslSturDefect

OID (numeric): 1.3.6.1.4.1.9.9.155.1.3.1.5

Node type: OBJECT-TYPE

Type: SdslStuxDefect

Access: read-only

Description: This object specifies any possible defects currently being exhibited by the STU-R.

This object has the intention of supplementing ifOperStatus.

What is cSdslSturDefect?

Reports any defects currently detected on the STU-R transceiver, supplementing the standard ifOperStatus to give more detail on line-level problems at the remote end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.3.1.5
snmpwalk -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturDefect

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.3.1.5.1
snmpget -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslSturDefect.1

Start monitoring Cisco SDSL DSLAMs and routers with SDSL line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SDSL-LINE-MIB::cSdslSturDefect OID value, configure state conditions and alerts, and monitor any Cisco SDSL DSLAMs and routers with SDSL line cards from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.155ciscoSdslLineMIBCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1ciscoSdslLineMIBObjectsCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.3cSdslSturPhysTableCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.3.1cSdslSturPhysEntryCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.3.1.5cSdslSturDefectCISCO-SDSL-LINE-MIB