All MIBs › CISCO-SDSL-LINE-MIB › cSdslStucTargetSnrMgn
cSdslStucTargetSnrMgn
Module: CISCO-SDSL-LINE-MIB
OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslStucTargetSnrMgn
OID (numeric): 1.3.6.1.4.1.9.9.155.1.14.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: This object specifies the target SNR margin. This is the desired noise margin the STU-C must achieve with a BER of 10-7 or better to successfully complete training. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10.
What is cSdslStucTargetSnrMgn?
A configurable value defining the target signal-to-noise ratio (SNR) margin the central-office unit (STU-C) must achieve, at a bit error rate of 10^-7 or better, to successfully complete line training; set in multiples of 10 (tenths of a dB).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1 | ciscoSdslLineMIBObjects | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.14 | cSdslLineConfProfileTable | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.14.1 | cSdslLineConfProfileEntry | CISCO-SDSL-LINE-MIB |
| 1.3.6.1.4.1.9.9.155.1.14.1.3 | cSdslStucTargetSnrMgn | CISCO-SDSL-LINE-MIB |