CISCO-SDSL-LINE-MIB :: cSdslStucIntervalLOSQs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SDSL-LINE-MIBcSdslStucIntervalLOSQs

cSdslStucIntervalLOSQs

Module: CISCO-SDSL-LINE-MIB

OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslStucIntervalLOSQs

OID (numeric): 1.3.6.1.4.1.9.9.155.1.8.1.4

Node type: OBJECT-TYPE

Type: PerfIntervalCount

Access: read-only

Description: This object specifies the number of seconds in the interval when the STU-C experienced LOSQ.

What is cSdslStucIntervalLOSQs?

Reports how many seconds during the current interval the central-office SDSL modem (STU-C) experienced a Loss of Signal Quality (LOSQ) condition.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.8.1.4
snmpwalk -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslStucIntervalLOSQs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.8.1.4.1
snmpget -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslStucIntervalLOSQs.1

Start monitoring Cisco SDSL DSLAMs and routers with SDSL line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SDSL-LINE-MIB::cSdslStucIntervalLOSQs OID value, configure state conditions and alerts, and monitor any Cisco SDSL DSLAMs and routers with SDSL line cards from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.155ciscoSdslLineMIBCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1ciscoSdslLineMIBObjectsCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.8cSdslStucIntervalTableCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.8.1cSdslStucIntervalEntryCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.8.1.4cSdslStucIntervalLOSQsCISCO-SDSL-LINE-MIB