CISCO-SDSL-LINE-MIB :: cSdslStucCurrRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SDSL-LINE-MIBcSdslStucCurrRate

cSdslStucCurrRate

Module: CISCO-SDSL-LINE-MIB

OID (symbolic): CISCO-SDSL-LINE-MIB::cSdslStucCurrRate

OID (numeric): 1.3.6.1.4.1.9.9.155.1.2.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object specifies the rate the STU-C transceiver was able to obtain following training.

What is cSdslStucCurrRate?

Reports the data rate the STU-C transceiver negotiated and achieved after training with its remote peer, indicating the current SDSL link speed from the central office side.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.2.1.6
snmpwalk -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslStucCurrRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.155.1.2.1.6.1
snmpget -v2c -c public <target> CISCO-SDSL-LINE-MIB::cSdslStucCurrRate.1

Start monitoring Cisco SDSL DSLAMs and routers with SDSL line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SDSL-LINE-MIB::cSdslStucCurrRate OID value, configure state conditions and alerts, and monitor any Cisco SDSL DSLAMs and routers with SDSL line cards from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.155ciscoSdslLineMIBCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1ciscoSdslLineMIBObjectsCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.2cSdslStucPhysTableCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.2.1cSdslStucPhysEntryCISCO-SDSL-LINE-MIB
1.3.6.1.4.1.9.9.155.1.2.1.6cSdslStucCurrRateCISCO-SDSL-LINE-MIB