All MIBs › CISCO-PREFERRED-PATH-MIB › cPrefPathRouteMapGlobalActive
cPrefPathRouteMapGlobalActive
Module: CISCO-PREFERRED-PATH-MIB
OID (symbolic): CISCO-PREFERRED-PATH-MIB::cPrefPathRouteMapGlobalActive
OID (numeric): 1.3.6.1.4.1.9.9.592.1.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object allows to activate/de-activate all the routes within a fcroute-map.
This object is read-write for the values of 'all' and 'none', but cannot be set to 'partial'.
If this object is set to 'all', then all the routes within this fcroute-map will be activated.
If this object is set to 'none', then all routes within this fcroute-map will be de-activated.
The value of 'partial' indicates that not all of the routes within this fcroute-map are active. This happens when some of the routes within this fcroute-map is de-activated by using cPrefPathRouteMapRouteActive object.
After the fcroute-map is activated, any incremental updates or changes made to the match or set criteria would require this object to be set to 'all' again (re-activation).
What is cPrefPathRouteMapGlobalActive?
A read-write object that globally activates or de-activates all routes across all route-maps, accepting 'all' or 'none' (but not settable to 'partial') as a device-wide bulk switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.592.1.1.2.1.1 snmpwalk -v2c -c public <target> CISCO-PREFERRED-PATH-MIB::cPrefPathRouteMapGlobalActive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.592.1.1.2.1.1.1 snmpget -v2c -c public <target> CISCO-PREFERRED-PATH-MIB::cPrefPathRouteMapGlobalActive.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.592.1.1.2.1.1.1 i <value>
Start monitoring Cisco MDS Fibre Channel SAN switches (preferred path) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PREFERRED-PATH-MIB::cPrefPathRouteMapGlobalActive OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches (preferred path) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.592 | ciscoPrefPathMIB | CISCO-PREFERRED-PATH-MIB |
| 1.3.6.1.4.1.9.9.592.1 | ciscoPrefPathMIBObjects | CISCO-PREFERRED-PATH-MIB |
| 1.3.6.1.4.1.9.9.592.1.1 | ciscoPrefPathConfiguration | CISCO-PREFERRED-PATH-MIB |
| 1.3.6.1.4.1.9.9.592.1.1.2 | cPrefPathRouteMapGlobalTable | CISCO-PREFERRED-PATH-MIB |
| 1.3.6.1.4.1.9.9.592.1.1.2.1 | cPrefPathRouteMapGlobalEntry | CISCO-PREFERRED-PATH-MIB |
| 1.3.6.1.4.1.9.9.592.1.1.2.1.1 | cPrefPathRouteMapGlobalActive | CISCO-PREFERRED-PATH-MIB |