CISCO-PPPOE-MIB :: cPppoeSystemSessionThresholdTrap

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-PPPOE-MIB › cPppoeSystemSessionThresholdTrap

cPppoeSystemSessionThresholdTrap

Module: CISCO-PPPOE-MIB

OID (symbolic): CISCO-PPPOE-MIB::cPppoeSystemSessionThresholdTrap

OID (numeric): 1.3.6.1.4.1.9.9.194.2.0.1

Node type: NOTIFICATION-TYPE

Description: A notification indicating that number of active sessions on the system exceeded system sessions threshold value. System sessions threshold value is indicated by cPppoeSystemThresholdSessions.

An agent must not generate more than one cPppoeSessionThresholdTrap `trap-event` in a 30 second period, where a `trap-event` is the transmission of a single trap PDU to a list of trap destinations. If additional `the number of PPPoE sessions exceeds threshold` condition occur within the 30 second `throttling` period, then these trap-events should be suppressed by the agent. An NMS should periodically check the value of cPppoeCurrSessions to detect any missed cPppoeVcSessionThresholdTrap trap-events, e.g. due to throttling or transmission loss. Where 30 is the `throttling` period of trap-event.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-PPPOE-MIB::cPppoeSystemSessionThresholdTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.194.2.0.1

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:60901->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (128763365) 14 days, 21:40:33.65
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-PPPOE-MIB::cPppoeSystemSessionThresholdTrap

Start monitoring Cisco broadband access routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PPPOE-MIB::cPppoeSystemSessionThresholdTrap OID value, configure state conditions and alerts, and monitor any Cisco broadband access routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.194ciscoPppoeMIBCISCO-PPPOE-MIB
1.3.6.1.4.1.9.9.194.2ciscoPppoeMIBNotificationPrefixCISCO-PPPOE-MIB
1.3.6.1.4.1.9.9.194.2.0ciscoPppoeMIBNotificationCISCO-PPPOE-MIB
1.3.6.1.4.1.9.9.194.2.0.1cPppoeSystemSessionThresholdTrapCISCO-PPPOE-MIB