All MIBs › CISCO-PPPOE-MIB › cPppoeSystemSessionPerVLANLimitNotif
cPppoeSystemSessionPerVLANLimitNotif
Module: CISCO-PPPOE-MIB
OID (symbolic): CISCO-PPPOE-MIB::cPppoeSystemSessionPerVLANLimitNotif
OID (numeric): 1.3.6.1.4.1.9.9.194.2.0.5
Node type: NOTIFICATION-TYPE
Description: A notification indicating that number of active session on a Vlan has reached the maximum limit. There won't be any new PPPoE session possible on this Vlan. The maximum limit can be referred through object cPppoeSystemPerVLANlimit. The Vlan ID of vlan can be referred though object cPppoeSystemSessionVlanID. If Vlan is QinQ, cPppoeSystemSessionInnerVlanID refers the inner Vlan id. In case the vlan is not QinQ cPppoeSystemSessionInnerVlanID will be zero. The interface details can be referred through ifDescr object.
An agent must not generate more than one cPppoeSystemSessionPerVLANLimitNotif `trap-event` in a 30 second period, where a `trap-event` is the transmission of a single trap PDU to a list of trap destinations. If additional `the number of PPPoE sessions on this Vlan exceeds the allowed limit` condition occur within the 30 second `throttling` period, then these trap-events should be suppressed by the agent.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' CISCO-PPPOE-MIB::cPppoeSystemSessionPerVLANLimitNotif snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.194.2.0.5
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:59900->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (143163900) 16 days, 13:40:39.00 SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-PPPOE-MIB::cPppoeSystemSessionPerVLANLimitNotif
SNMPv3 example:
snmptrap -v3 -l authPriv -u snmpv3user -a SHA -A "AuthPass1" -x AES -X "PrivPass1" <manager> '' CISCO-PPPOE-MIB::cPppoeSystemSessionPerVLANLimitNotif
Start monitoring Cisco broadband access routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PPPOE-MIB::cPppoeSystemSessionPerVLANLimitNotif OID value, configure state conditions and alerts, and monitor any Cisco broadband access routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.194 | ciscoPppoeMIB | CISCO-PPPOE-MIB |
| 1.3.6.1.4.1.9.9.194.2 | ciscoPppoeMIBNotificationPrefix | CISCO-PPPOE-MIB |
| 1.3.6.1.4.1.9.9.194.2.0 | ciscoPppoeMIBNotification | CISCO-PPPOE-MIB |
| 1.3.6.1.4.1.9.9.194.2.0.5 | cPppoeSystemSessionPerVLANLimitNotif | CISCO-PPPOE-MIB |