All MIBs › CISCO-PORT-QOS-MIB › cportQosRLConfigBurstSize
cportQosRLConfigBurstSize
Module: CISCO-PORT-QOS-MIB
OID (symbolic): CISCO-PORT-QOS-MIB::cportQosRLConfigBurstSize
OID (numeric): 1.3.6.1.4.1.9.9.189.1.1.1.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The burst size. The amount of traffic, in bytes, in excess of the sustained rate which will be instantaneously permitted by the rate limit. Writing to this object also requires writing a value of true(1) to cportQosRLConfigEnable and a valid value to the cportQosRLConfigRate at the same time.
What is cportQosRLConfigBurstSize?
This read-write object configures, in bytes, how much traffic above the sustained rate the rate limiter will instantaneously allow through in a burst.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.189.1.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-PORT-QOS-MIB::cportQosRLConfigBurstSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.189.1.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-PORT-QOS-MIB::cportQosRLConfigBurstSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.189.1.1.1.1.4.1 i <value>
Start monitoring Cisco Layer 3 switch/router (per-port QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PORT-QOS-MIB::cportQosRLConfigBurstSize OID value, configure state conditions and alerts, and monitor any Cisco Layer 3 switch/router (per-port QoS) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.189 | ciscoPortQosMIB | CISCO-PORT-QOS-MIB |
| 1.3.6.1.4.1.9.9.189.1 | ciscoPortQosMIBObjects | CISCO-PORT-QOS-MIB |
| 1.3.6.1.4.1.9.9.189.1.1 | cportQosRLConfig | CISCO-PORT-QOS-MIB |
| 1.3.6.1.4.1.9.9.189.1.1.1 | cportQosRLConfigTable | CISCO-PORT-QOS-MIB |
| 1.3.6.1.4.1.9.9.189.1.1.1.1 | cportQosRLConfigEntry | CISCO-PORT-QOS-MIB |
| 1.3.6.1.4.1.9.9.189.1.1.1.1.4 | cportQosRLConfigBurstSize | CISCO-PORT-QOS-MIB |