CISCO-PAE-MIB :: cpaePortOperVlanType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-PAE-MIBcpaePortOperVlanType

cpaePortOperVlanType

Module: CISCO-PAE-MIB

OID (symbolic): CISCO-PAE-MIB::cpaePortOperVlanType

OID (numeric): 1.3.6.1.4.1.9.9.220.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The type of the Vlan which is assigned to this port via IEEE-802.1x and related methods of authentication supported by the system.

A value of 'other' for this object indicates type of Vlan assigned to this port; via IEEE-802.1x authentication; is other than the ones specified by listed enumerations for this object.

A value of 'none' for this object indicates that there is no Vlan assigned to this port via IEEE-802.1x authentication. For such a case, corresponding value of cpaePortOperVlan object will be zero.

A value of 'guest' for this object indicates that Vlan assigned to this port; via IEEE-802.1x authentication; is of type Guest Vlan and specified by the object cpaeGuestVlanNumber for this entry.

A value of 'authFail' for this object indicates that Vlan assigned to this port; via IEEE-802.1x authentication; is of type Auth-Fail Vlan and specified by the object cpaePortAuthFailVlan for this entry.

What is cpaePortOperVlanType?

This read-only value reports the type of VLAN currently assigned to a switch port as a result of IEEE 802.1x (or related) authentication, such as whether it is a standard, guest, or auth-fail VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.220.1.1.1.8
snmpwalk -v2c -c public <target> CISCO-PAE-MIB::cpaePortOperVlanType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.220.1.1.1.8.1
snmpget -v2c -c public <target> CISCO-PAE-MIB::cpaePortOperVlanType.1

Start monitoring Cisco Catalyst switches / access-layer platforms (802.1X) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PAE-MIB::cpaePortOperVlanType OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches / access-layer platforms (802.1X) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.220ciscoPaeMIBCISCO-PAE-MIB
1.3.6.1.4.1.9.9.220.1cpaeMIBObjectCISCO-PAE-MIB
1.3.6.1.4.1.9.9.220.1.1cpaePortTableCISCO-PAE-MIB
1.3.6.1.4.1.9.9.220.1.1.1cpaePortEntryCISCO-PAE-MIB
1.3.6.1.4.1.9.9.220.1.1.1.8cpaePortOperVlanTypeCISCO-PAE-MIB