All MIBs › CISCO-NETSYNC-MIB › cnsT4ClkSrcWtrTime
cnsT4ClkSrcWtrTime
Module: CISCO-NETSYNC-MIB
OID (symbolic): CISCO-NETSYNC-MIB::cnsT4ClkSrcWtrTime
OID (numeric): 1.3.6.1.4.1.9.9.761.1.1.5.1.13
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: This object indicates the wait-to-restore time value of a T4 input clock source.
The wait-to-restore time ensures that a previous failed synchronization source is only again considered as available by the selection process if it is fault-free for a certain time. When a signal failure condition is cleared on a clock source, it waits the duration of the wait-to-restore time before clearing the signal failure status on the clock source.
What is cnsT4ClkSrcWtrTime?
This object reports the wait-to-restore time configured for a specific T4-table candidate source, the probation period that source must remain fault-free before the T4 selection process will reconsider it, independently tunable from any T0-side WTR setting on the same source. An admin who wants extra caution before returning to a previously-flaky source specifically for T4 output distribution, even if T0 selection is less conservative about it, would configure a longer WTR here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.5.1.13 snmpwalk -v2c -c public <target> CISCO-NETSYNC-MIB::cnsT4ClkSrcWtrTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.5.1.13.1 snmpget -v2c -c public <target> CISCO-NETSYNC-MIB::cnsT4ClkSrcWtrTime.1
Start monitoring Cisco routers/switches with SyncE (G.781) clock synchronization with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NETSYNC-MIB::cnsT4ClkSrcWtrTime OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with SyncE (G.781) clock synchronization from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.761 | ciscoNetsyncMIB | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1 | ciscoNetsyncMIBObjects | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1 | ciscoNetsyncMIBTables | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5 | cnsT4ClockSourceTable | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5.1 | cnsT4ClockSourceEntry | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5.1.13 | cnsT4ClkSrcWtrTime | CISCO-NETSYNC-MIB |