All MIBs › CISCO-NETSYNC-MIB › cnsT4ClkSrcMSW
cnsT4ClkSrcMSW
Module: CISCO-NETSYNC-MIB
OID (symbolic): CISCO-NETSYNC-MIB::cnsT4ClkSrcMSW
OID (numeric): 1.3.6.1.4.1.9.9.761.1.1.5.1.19
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: This object indicates the manual switching flag.
The 'true' value indicates the currently selected T4 clock source is a result of the manual switching. The switch allows a user to select a synchronization source assuming it is enabled, not locked out, not in signal fail condition, and has a QL better than DNU in QL-enabled mode.
A clock source is enabled when it occupies a row in cnsT4ClockSourceTable. A clock source is not locked out when cnsT4ClkSrcLockout contains the value 'false'. A clock source is not in signal failure condition when cnsT4ClkSrcSignalFailure contains the value 'false'. The QL is identified in cnsT4ClkSrcQualityLevel.
In QL-enabled mode, a manual switch can be performed only to a source which has the highest available QL.
What is cnsT4ClkSrcMSW?
This object indicates whether a specific T4-table candidate source is the manually-switched-to source for T4 output, within the same enabled, not-locked-out, QL-constrained rules described for T0 manual switching, mirroring cnsInpSrcMSW. An admin auditing recent manual interventions on T4 output distribution would check this table to confirm which candidate, if any, currently reflects a deliberate manual switch command.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.5.1.19 snmpwalk -v2c -c public <target> CISCO-NETSYNC-MIB::cnsT4ClkSrcMSW
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.5.1.19.1 snmpget -v2c -c public <target> CISCO-NETSYNC-MIB::cnsT4ClkSrcMSW.1
Start monitoring Cisco routers/switches with SyncE (G.781) clock synchronization with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NETSYNC-MIB::cnsT4ClkSrcMSW OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with SyncE (G.781) clock synchronization from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.761 | ciscoNetsyncMIB | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1 | ciscoNetsyncMIBObjects | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1 | ciscoNetsyncMIBTables | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5 | cnsT4ClockSourceTable | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5.1 | cnsT4ClockSourceEntry | CISCO-NETSYNC-MIB |
| 1.3.6.1.4.1.9.9.761.1.1.5.1.19 | cnsT4ClkSrcMSW | CISCO-NETSYNC-MIB |