CISCO-NETSYNC-MIB :: cnsInpSrcSSMCap

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-NETSYNC-MIBcnsInpSrcSSMCap

cnsInpSrcSSMCap

Module: CISCO-NETSYNC-MIB

OID (symbolic): CISCO-NETSYNC-MIB::cnsInpSrcSSMCap

OID (numeric): 1.3.6.1.4.1.9.9.761.1.1.3.1.6

Node type: OBJECT-TYPE

Type: CiscoNetsyncSSMCap

Access: read-only

Description: This object indicates the SSM capability of an input clock source configured for the T0 clock selection. This is applicable only to any synchronous interface clock source except SyncE interface, which is identified by cnsInpSrcIntfType 'netsyncIfTypeEthernet'.

What is cnsInpSrcSSMCap?

This object reports whether a given candidate clock source supports Synchronization Status Messaging (SSM), the T1/E1/SONET equivalent of ESMC for advertising quality level, applicable to non-Ethernet synchronous interfaces. It matters for the same reason ESMC capability matters on Ethernet sources: without SSM support, a T1/E1/SONET-derived source cannot dynamically advertise its own quality level, forcing the device to rely on a static configured value instead. An admin relying on a legacy T1 BITS feed for timing would check this to confirm SSM is actually being exchanged rather than assumed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.3.1.6
snmpwalk -v2c -c public <target> CISCO-NETSYNC-MIB::cnsInpSrcSSMCap

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.761.1.1.3.1.6.1
snmpget -v2c -c public <target> CISCO-NETSYNC-MIB::cnsInpSrcSSMCap.1

Start monitoring Cisco routers/switches with SyncE (G.781) clock synchronization with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NETSYNC-MIB::cnsInpSrcSSMCap OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with SyncE (G.781) clock synchronization from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.761ciscoNetsyncMIBCISCO-NETSYNC-MIB
1.3.6.1.4.1.9.9.761.1ciscoNetsyncMIBObjectsCISCO-NETSYNC-MIB
1.3.6.1.4.1.9.9.761.1.1ciscoNetsyncMIBTablesCISCO-NETSYNC-MIB
1.3.6.1.4.1.9.9.761.1.1.3cnsInputSourceTableCISCO-NETSYNC-MIB
1.3.6.1.4.1.9.9.761.1.1.3.1cnsInputSourceEntryCISCO-NETSYNC-MIB
1.3.6.1.4.1.9.9.761.1.1.3.1.6cnsInpSrcSSMCapCISCO-NETSYNC-MIB