CISCO-MPLS-TE-STD-EXT-MIB :: cmplsTunnelReoptReason

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-MPLS-TE-STD-EXT-MIB › cmplsTunnelReoptReason

cmplsTunnelReoptReason

Module: CISCO-MPLS-TE-STD-EXT-MIB

OID (symbolic): CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelReoptReason

OID (numeric): 1.3.6.1.4.1.9.9.738.1.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: accessible-for-notify

Description: This object indicates the reason of the tunnel reoptimization: - unknown: the reason is not known - periodicTimerExpiry: Periodic Reoptimization - bandwidthCLIChange: the tunnel bandwidth has been changed from CLI - bandwidthOverflow: an auto-bandwidth overflow occurred - bandwidthUnderflow: an auto-bandwidth underflow occured - bandwidthAdjustment: an auto-bandwidth application occured - fastReRoute: a fast re-route occured - cliRequest: User-triggerred - metricTypeChange: tunnel metric type has been changed from CLI - preferredPathExists: preferred-path-exists message received from a downstream node - poSwitchoverTrigger: User-requested path-option switchover - bandwidthChange: bandwidth change - autoBandwidth: Auto Bandwidth - remergeError: Remerge Error - dueToMaximumMetric: Reoptimization due to receiving an LSA with MAX metric - pathProtectionSwitchover: Path Protection Switchover - iEPEnableReoptimization: IEP Enable Reoptimization - affinityPathVerificationFail: Affinity path verification failure - softPreemption: soft preemption (see RFC 5712) - preferredTreeExists: preferred-tree-exists message received from a downstream node - costLimitPathVerificationFail: Cost Limit path verification failure - linkupReopt: link state up - iEPChangeReoptimization: inuse explicit-path change - poChangeReoptimization: inuse path-option change - bfdSessionTypeChange: a bfd session type change occured This object is intended to be included in the trap mplsTunnelReoptimized defined in MPLS-TE-STD-MIB.

What is cmplsTunnelReoptReason?

A notification object indicating why an MPLS TE tunnel was reoptimized, such as a periodic timer, a CLI bandwidth change, or an auto-bandwidth overflow/underflow event.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.738cmplsTeStdExtMIBCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1cmplsTeStdExtMIBObjectsCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.2cmplsTeTunnelReasonTableCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.2.1cmplsTeTunnelReasonEntryCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.2.1.1cmplsTunnelReoptReasonCISCO-MPLS-TE-STD-EXT-MIB