All MIBs › CISCO-MPLS-TE-STD-EXT-MIB › cmplsTunnelAutoBWMax
cmplsTunnelAutoBWMax
Module: CISCO-MPLS-TE-STD-EXT-MIB
OID (symbolic): CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWMax
OID (numeric): 1.3.6.1.4.1.9.9.738.1.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the maximum bandwidth that the auto-bandwidth algorithm can apply to a tunnel when the adjustment threshold is overcome. This object value is not aplicable if cmplsTunnelAutoBWStatus is 'autoBWDisabled'.
What is cmplsTunnelAutoBWMax?
A read-write setting specifying the highest bandwidth the auto-bandwidth algorithm may assign to a tunnel when adjustment thresholds are crossed; irrelevant if auto-bandwidth is disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.738.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.738.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWMax.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.738.1.1.1.3.1 i <value>
Start monitoring Cisco MPLS-TE routers/label switch routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWMax OID value, configure state conditions and alerts, and monitor any Cisco MPLS-TE routers/label switch routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.738 | cmplsTeStdExtMIB | CISCO-MPLS-TE-STD-EXT-MIB |
| 1.3.6.1.4.1.9.9.738.1 | cmplsTeStdExtMIBObjects | CISCO-MPLS-TE-STD-EXT-MIB |
| 1.3.6.1.4.1.9.9.738.1.1 | cmplsTunnelAutoBWTable | CISCO-MPLS-TE-STD-EXT-MIB |
| 1.3.6.1.4.1.9.9.738.1.1.1 | cmplsTunnelAutoBWEntry | CISCO-MPLS-TE-STD-EXT-MIB |
| 1.3.6.1.4.1.9.9.738.1.1.1.3 | cmplsTunnelAutoBWMax | CISCO-MPLS-TE-STD-EXT-MIB |