CISCO-MPLS-TE-STD-EXT-MIB :: cmplsTunnelAutoBWCollectOnlyRequested

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-MPLS-TE-STD-EXT-MIB › cmplsTunnelAutoBWCollectOnlyRequested

cmplsTunnelAutoBWCollectOnlyRequested

Module: CISCO-MPLS-TE-STD-EXT-MIB

OID (symbolic): CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWCollectOnlyRequested

OID (numeric): 1.3.6.1.4.1.9.9.738.1.1.1.24

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This object indicates the bandwidth that would have been requested by the auto-bandwidth algorithm if the auto-bandwidth functionality was enabled. If the collect only mode is enabled, the bandwidth change request will not be executed. If mplsTunnelInstance is zero this object will be set to zero. This object value is not aplicable if cmplsTunnelAutoBWStatus is 'autoBWDisabled'.

What is cmplsTunnelAutoBWCollectOnlyRequested?

Reports the bandwidth value the auto-bandwidth algorithm would have requested if it were actively enabled; used in collect-only (monitoring) mode where no real bandwidth change is applied.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.738.1.1.1.24
snmpwalk -v2c -c public <target> CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWCollectOnlyRequested

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.738.1.1.1.24.1
snmpget -v2c -c public <target> CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWCollectOnlyRequested.1

Start monitoring Cisco MPLS-TE routers/label switch routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MPLS-TE-STD-EXT-MIB::cmplsTunnelAutoBWCollectOnlyRequested OID value, configure state conditions and alerts, and monitor any Cisco MPLS-TE routers/label switch routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.738cmplsTeStdExtMIBCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1cmplsTeStdExtMIBObjectsCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.1cmplsTunnelAutoBWTableCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.1.1cmplsTunnelAutoBWEntryCISCO-MPLS-TE-STD-EXT-MIB
1.3.6.1.4.1.9.9.738.1.1.1.24cmplsTunnelAutoBWCollectOnlyRequestedCISCO-MPLS-TE-STD-EXT-MIB