CISCO-MGX82XX-SONET-MIB :: sonetPathCurrent15minSESsThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-MGX82XX-SONET-MIBsonetPathCurrent15minSESsThreshold

sonetPathCurrent15minSESsThreshold

Module: CISCO-MGX82XX-SONET-MIB

OID (symbolic): CISCO-MGX82XX-SONET-MIB::sonetPathCurrent15minSESsThreshold

OID (numeric): 1.3.6.1.4.1.351.110.4.6.1.5.7.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The default is set to 3. This threshold is the same for Far End and Near End.

What is sonetPathCurrent15minSESsThreshold?

This is the writable 15-minute alarm threshold for Severely Errored Seconds, defaulting to 3, applied against the current SESs counter. A default this low (just 3 severely errored seconds out of 900) reflects how much more serious an SES is than a plain ES -- an admin would rarely raise this threshold much, since even a handful of severe errors in a quarter-hour usually indicates a real fault rather than background noise. A current 15-minute SESs count of 4 would already exceed this default threshold of 3, triggering an alarm well before the interval's other counters (like ESs) necessarily look alarming.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.6.1.5.7.1.5
snmpwalk -v2c -c public <target> CISCO-MGX82XX-SONET-MIB::sonetPathCurrent15minSESsThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.6.1.5.7.1.5.1
snmpget -v2c -c public <target> CISCO-MGX82XX-SONET-MIB::sonetPathCurrent15minSESsThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.6.1.5.7.1.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sonetPathCurrent15minSESsThreshold.1

Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-SONET-MIB::sonetPathCurrent15minSESsThreshold OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.6sonetBASIS-MIB
1.3.6.1.4.1.351.110.4.6.1cwsonetObjectsBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.6.1.5cwsonetPathCISCO-MGX82XX-SONET-MIB
1.3.6.1.4.1.351.110.4.6.1.5.7sonetPathAlarmTableCISCO-MGX82XX-SONET-MIB
1.3.6.1.4.1.351.110.4.6.1.5.7.1sonetPathAlarmEntryCISCO-MGX82XX-SONET-MIB
1.3.6.1.4.1.351.110.4.6.1.5.7.1.5sonetPathCurrent15minSESsThresholdCISCO-MGX82XX-SONET-MIB