All MIBs › CISCO-MGX82XX-DSX3-MIB › dsx3PlcpLineStatisticalAlarmState
dsx3PlcpLineStatisticalAlarmState
Module: CISCO-MGX82XX-DSX3-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineStatisticalAlarmState
OID (numeric): 1.3.6.1.4.1.351.110.4.4.2.3.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This variable is a bitmap of the DSX3 Line Statictical
Alarms on the card. A value of zero indicates no alarms.
Itemized below are the individual alarm bits:
BitPosition Alarm
----------- -----
0 Bip8CV 15 minute threshold exceeded
1 Bip8CV 24 hour threshold exceeded
2 Bip8ES 15 minute threshold exceeded
3 Bip8ES 24 hour threshold exceeded
4 Bip8SES 15 minute threshold exceeded
5 Bip8SES 24 hour threshold exceeded
6 Plcp SEFS 15 minute threshold exceeded
7 Plcp SEFS 24 hour threshold exceeded
8 Plcp UAS 15 minute threshold exceeded
9 Plcp UAS 24 hour threshold exceeded
What is dsx3PlcpLineStatisticalAlarmState?
A read-only bitmap reporting which DSX3 line statistical alarm conditions are currently active on the card (such as which threshold, e.g. BIP-8 CV 15-minute, has been exceeded), where zero means no alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.2.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineStatisticalAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.4.2.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineStatisticalAlarmState.1
Start monitoring Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-MIB::dsx3PlcpLineStatisticalAlarmState OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 WAN switch (T3/E3 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4 | dsx3 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.4.2 | dsx3Framing | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.4.2.3 | dsx3PlcpAlarm | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1 | dsx3PlcpAlarmTable | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1.1 | dsx3PlcpAlarmEntry | CISCO-MGX82XX-DSX3-MIB |
| 1.3.6.1.4.1.351.110.4.4.2.3.1.1.2 | dsx3PlcpLineStatisticalAlarmState | CISCO-MGX82XX-DSX3-MIB |